Renderer issue.

Have an all AMD machine, so using the D3D renderer.

Was using D3D10 - the game would lock up the whole PC every so often, and would have to re-boot. Thought I would grab the D3D11 renderer and got this critical error. I turned off the option to set my user.ini and UT.ini to read only.

Do not have the 4.69A patch, just 4.36

Have the 4 GB patch (fixes the Win10 "not enough virtual memory" glitch).

HD skins and weapons textures mod installed.

Did you install all the .net runtimes as it states on the website? what 4gb patch are you running? I never even heard of that issue.

4 gb S3TC textures ?

You must set your d3d for enable this
Copy past the s3tc set D3D9 present here in your D3D activated
http://unrealtournament.99.free.fr/foru ... f=51&t=482

You can test the xopengl or D3D9 from 469b ( make a save before)
http://medor.no-ip.org/index.php?dir=Pa ... rch_mode=f

Either that or try the OpenGL video driver

All drivers can be found here: Latest UT99 Video Drivers

I threw the 4.69A patch on, and it seems to be good. I am glad the B version is available. Gonna grab it now. The .net files - yes 3 are available, but my machine only accepted 2 of them.

the 4 GB patch is not related to UT. It is for Win 10. There are programs - when you are installing them - they think there isn't enough Virtual Memory available.

I gave out wrong information. It was not a patch, but I ran the Windows command prompt / DOS window. (Windows fixed itself, but I had to tell it to) *effin' junk O/S*

Here is how I dealt with that issue :

Wait.... I do have a 4 GB Win10 patch - (don't get old kids)


http://www.mediafire.com/file/7v6demsq8 ... h.zip/file

you shouldn't have to do any of that at all. I've never seen that out of memory message on windows 10

=(V)=RocketJedi wrote: ↑Wed Feb 17, 2021 3:31 pm you shouldn't have to do any of that at all. I've never seen that out of memory message on windows 10

It's quite rare, but I've seen out of memory errors on Windows 10. I had it happen to me.

I'm sure if my motherboard had 32 GB of RAM instead of the max 8 GB I have, I wouldn't see any issues at all with this AMD machine. It's okay, but I will build an Intel and Nvidia machine next time.


I appreciate everyone's thoughts on the matter.

I have found that for my system, ONLY the D3DV9 works flawlessly all of the time. It might be a bit old for some definitions, but it always works.
Sometimes, going backwards is the best idea.

I have built another PC since I posted this ^.

It was all through NewEgg :

MSI mid-tower - 9 fans total - all set to maximum speed
Asus 450b plus II - Full ATX
32 GB of RAM
AMD Ryzen 5 - 3600
my XFX RX480 GPU that I had (put fresh thermal paste on it)
eVGA 500W PSU

Now I have no issues. I am using the 4.69b patch with the Xopengl renderer.

This machines opens Gimp in an eye blink. It's a pleasure to work with now, and I have saved myself boat-loads of time.

My micro-ATX is going to become a bitcoin mining rig.

=(V)=Kevster wrote: ↑Fri Feb 19, 2021 11:56 pm

=(V)=RocketJedi wrote: ↑Wed Feb 17, 2021 3:31 pm you shouldn't have to do any of that at all. I've never seen that out of memory message on windows 10

It's quite rare, but I've seen out of memory errors on Windows 10. I had it happen to me.

Do you turn off your page file? Or doing something custom with your page file?

=(V)=~Sean~ wrote: ↑Sat Mar 13, 2021 11:53 pm I have built another PC since I posted this ^.

It was all through NewEgg :

MSI mid-tower - 9 fans total - all set to maximum speed
Asus 450b plus II - Full ATX
32 GB of RAM
AMD Ryzen 5 - 3600
my XFX RX480 GPU that I had (put fresh thermal paste on it)
eVGA 500W PSU

Now I have no issues. I am using the 4.69b patch with the Xopengl renderer.

This machines opens Gimp in an eye blink. It's a pleasure to work with now, and I have saved myself boat-loads of time.

My micro-ATX is going to become a bitcoin mining rig.

Why dont you just watercool? listening to fans at full speed has to be annoying . My p is overclocked and i dont even run at full speed full time